| [12177] | 1 | ENet 1.3.1 (February 10, 2011): |
|---|
| 2 | |
|---|
| 3 | * fixed bug in tracking of reliable data in transit |
|---|
| 4 | * reliable data window size now scales with the throttle |
|---|
| 5 | * fixed bug in fragment length calculation when checksums are used |
|---|
| 6 | |
|---|
| 7 | ENet 1.3.0 (June 5, 2010): |
|---|
| 8 | |
|---|
| 9 | * enet_host_create() now requires the channel limit to be specified as |
|---|
| 10 | a parameter |
|---|
| 11 | * enet_host_connect() now accepts a data parameter which is supplied |
|---|
| 12 | to the receiving receiving host in the event data field for a connect event |
|---|
| 13 | * added an adaptive order-2 PPM range coder as a built-in compressor option |
|---|
| 14 | which can be set with enet_host_compress_with_range_coder() |
|---|
| 15 | * added support for packet compression configurable with a callback |
|---|
| 16 | * improved session number handling to not rely on the packet checksum |
|---|
| 17 | field, saving 4 bytes per packet unless the checksum option is used |
|---|
| 18 | * removed the dependence on the rand callback for session number handling |
|---|
| 19 | |
|---|
| 20 | Caveats: This version is not protocol compatible with the 1.2 series or |
|---|
| 21 | earlier. The enet_host_connect and enet_host_create API functions require |
|---|
| 22 | supplying additional parameters. |
|---|
| 23 | |
|---|
| 24 | ENet 1.2.2 (June 5, 2010): |
|---|
| 25 | |
|---|
| 26 | * checksum functionality is now enabled by setting a checksum callback |
|---|
| 27 | inside ENetHost instead of being a configure script option |
|---|
| 28 | * added totalSentData, totalSentPackets, totalReceivedData, and |
|---|
| 29 | totalReceivedPackets counters inside ENetHost for getting usage |
|---|
| 30 | statistics |
|---|
| 31 | * added enet_host_channel_limit() for limiting the maximum number of |
|---|
| 32 | channels allowed by connected peers |
|---|
| 33 | * now uses dispatch queues for event dispatch rather than potentially |
|---|
| 34 | unscalable array walking |
|---|
| 35 | * added no_memory callback that is called when a malloc attempt fails, |
|---|
| 36 | such that if no_memory returns rather than aborts (the default behavior), |
|---|
| 37 | then the error is propagated to the return value of the API calls |
|---|
| 38 | * now uses packed attribute for protocol structures on platforms with |
|---|
| 39 | strange alignment rules |
|---|
| 40 | * improved autoconf build system contributed by Nathan Brink allowing |
|---|
| 41 | for easier building as a shared library |
|---|
| 42 | |
|---|
| 43 | Caveats: If you were using the compile-time option that enabled checksums, |
|---|
| 44 | make sure to set the checksum callback inside ENetHost to enet_crc32 to |
|---|
| 45 | regain the old behavior. The ENetCallbacks structure has added new fields, |
|---|
| 46 | so make sure to clear the structure to zero before use if |
|---|
| 47 | using enet_initialize_with_callbacks(). |
|---|
| 48 | |
|---|
| 49 | ENet 1.2.1 (November 12, 2009): |
|---|
| 50 | |
|---|
| 51 | * fixed bug that could cause disconnect events to be dropped |
|---|
| 52 | * added thin wrapper around select() for portable usage |
|---|
| 53 | * added ENET_SOCKOPT_REUSEADDR socket option |
|---|
| 54 | * factored enet_socket_bind()/enet_socket_listen() out of enet_socket_create() |
|---|
| 55 | * added contributed Code::Blocks build file |
|---|
| 56 | |
|---|
| 57 | ENet 1.2 (February 12, 2008): |
|---|
| 58 | |
|---|
| 59 | * fixed bug in VERIFY_CONNECT acknowledgement that could cause connect |
|---|
| 60 | attempts to occasionally timeout |
|---|
| 61 | * fixed acknowledgements to check both the outgoing and sent queues |
|---|
| 62 | when removing acknowledged packets |
|---|
| 63 | * fixed accidental bit rot in the MSVC project file |
|---|
| 64 | * revised sequence number overflow handling to address some possible |
|---|
| 65 | disconnect bugs |
|---|
| 66 | * added enet_host_check_events() for getting only local queued events |
|---|
| 67 | * factored out socket option setting into enet_socket_set_option() so |
|---|
| 68 | that socket options are now set separately from enet_socket_create() |
|---|
| 69 | |
|---|
| 70 | Caveats: While this release is superficially protocol compatible with 1.1, |
|---|
| 71 | differences in the sequence number overflow handling can potentially cause |
|---|
| 72 | random disconnects. |
|---|
| 73 | |
|---|
| 74 | ENet 1.1 (June 6, 2007): |
|---|
| 75 | |
|---|
| 76 | * optional CRC32 just in case someone needs a stronger checksum than UDP |
|---|
| 77 | provides (--enable-crc32 configure option) |
|---|
| 78 | * the size of packet headers are half the size they used to be (so less |
|---|
| 79 | overhead when sending small packets) |
|---|
| 80 | * enet_peer_disconnect_later() that waits till all queued outgoing |
|---|
| 81 | packets get sent before issuing an actual disconnect |
|---|
| 82 | * freeCallback field in individual packets for notification of when a |
|---|
| 83 | packet is about to be freed |
|---|
| 84 | * ENET_PACKET_FLAG_NO_ALLOCATE for supplying pre-allocated data to a |
|---|
| 85 | packet (can be used in concert with freeCallback to support some custom |
|---|
| 86 | allocation schemes that the normal memory allocation callbacks would |
|---|
| 87 | normally not allow) |
|---|
| 88 | * enet_address_get_host_ip() for printing address numbers |
|---|
| 89 | * promoted the enet_socket_*() functions to be part of the API now |
|---|
| 90 | * a few stability/crash fixes |
|---|
| 91 | |
|---|
| 92 | |
|---|
