source: code/branches/kicklib2/src/external/bullet/BulletDynamics/ConstraintSolver/btSliderConstraint.h @ 8474

/*
Bullet Continuous Collision Detection and Physics Library
Copyright (c) 2003-2006 Erwin Coumans  http://continuousphysics.com/Bullet/

This software is provided 'as-is', without any express or implied warranty.
In no event will the authors be held liable for any damages arising from the use of this software.
Permission is granted to anyone to use this software for any purpose,
including commercial applications, and to alter it and redistribute it freely,
subject to the following restrictions:

1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required.
2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software.
3. This notice may not be removed or altered from any source distribution.
*/

/*
Added by Roman Ponomarev (rponom@gmail.com)
April 04, 2008

TODO:
 - add clamping od accumulated impulse to improve stability
 - add conversion for ODE constraint solver
*/

#ifndef SLIDER_CONSTRAINT_H
#define SLIDER_CONSTRAINT_H



#include "LinearMath/btVector3.h"
#include "btJacobianEntry.h"
#include "btTypedConstraint.h"



class btRigidBody;



#define SLIDER_CONSTRAINT_DEF_SOFTNESS          (btScalar(1.0))
#define SLIDER_CONSTRAINT_DEF_DAMPING           (btScalar(1.0))
#define SLIDER_CONSTRAINT_DEF_RESTITUTION       (btScalar(0.7))
#define SLIDER_CONSTRAINT_DEF_CFM                       (btScalar(0.f))


enum btSliderFlags
{
        BT_SLIDER_FLAGS_CFM_DIRLIN = (1 << 0),
        BT_SLIDER_FLAGS_ERP_DIRLIN = (1 << 1),
        BT_SLIDER_FLAGS_CFM_DIRANG = (1 << 2),
        BT_SLIDER_FLAGS_ERP_DIRANG = (1 << 3),
        BT_SLIDER_FLAGS_CFM_ORTLIN = (1 << 4),
        BT_SLIDER_FLAGS_ERP_ORTLIN = (1 << 5),
        BT_SLIDER_FLAGS_CFM_ORTANG = (1 << 6),
        BT_SLIDER_FLAGS_ERP_ORTANG = (1 << 7),
        BT_SLIDER_FLAGS_CFM_LIMLIN = (1 << 8),
        BT_SLIDER_FLAGS_ERP_LIMLIN = (1 << 9),
        BT_SLIDER_FLAGS_CFM_LIMANG = (1 << 10),
        BT_SLIDER_FLAGS_ERP_LIMANG = (1 << 11)
};


class btSliderConstraint : public btTypedConstraint
{
protected:
        ///for backwards compatibility during the transition to 'getInfo/getInfo2'
        bool            m_useSolveConstraintObsolete;
        bool            m_useOffsetForConstraintFrame;
        btTransform     m_frameInA;
    btTransform m_frameInB;
        // use frameA fo define limits, if true
        bool m_useLinearReferenceFrameA;
        // linear limits
        btScalar m_lowerLinLimit;
        btScalar m_upperLinLimit;
        // angular limits
        btScalar m_lowerAngLimit;
        btScalar m_upperAngLimit;
        // softness, restitution and damping for different cases
        // DirLin - moving inside linear limits
        // LimLin - hitting linear limit
        // DirAng - moving inside angular limits
        // LimAng - hitting angular limit
        // OrthoLin, OrthoAng - against constraint axis
        btScalar m_softnessDirLin;
        btScalar m_restitutionDirLin;
        btScalar m_dampingDirLin;
        btScalar m_cfmDirLin;

        btScalar m_softnessDirAng;
        btScalar m_restitutionDirAng;
        btScalar m_dampingDirAng;
        btScalar m_cfmDirAng;

        btScalar m_softnessLimLin;
        btScalar m_restitutionLimLin;
        btScalar m_dampingLimLin;
        btScalar m_cfmLimLin;

        btScalar m_softnessLimAng;
        btScalar m_restitutionLimAng;
        btScalar m_dampingLimAng;
        btScalar m_cfmLimAng;

        btScalar m_softnessOrthoLin;
        btScalar m_restitutionOrthoLin;
        btScalar m_dampingOrthoLin;
        btScalar m_cfmOrthoLin;

        btScalar m_softnessOrthoAng;
        btScalar m_restitutionOrthoAng;
        btScalar m_dampingOrthoAng;
        btScalar m_cfmOrthoAng;
        
        // for interlal use
        bool m_solveLinLim;
        bool m_solveAngLim;

        int m_flags;

        btJacobianEntry m_jacLin[3];
        btScalar                m_jacLinDiagABInv[3];

    btJacobianEntry     m_jacAng[3];

        btScalar m_timeStep;
    btTransform m_calculatedTransformA;
    btTransform m_calculatedTransformB;

        btVector3 m_sliderAxis;
        btVector3 m_realPivotAInW;
        btVector3 m_realPivotBInW;
        btVector3 m_projPivotInW;
        btVector3 m_delta;
        btVector3 m_depth;
        btVector3 m_relPosA;
        btVector3 m_relPosB;

        btScalar m_linPos;
        btScalar m_angPos;

        btScalar m_angDepth;
        btScalar m_kAngle;

        bool     m_poweredLinMotor;
    btScalar m_targetLinMotorVelocity;
    btScalar m_maxLinMotorForce;
    btScalar m_accumulatedLinMotorImpulse;
        
        bool     m_poweredAngMotor;
    btScalar m_targetAngMotorVelocity;
    btScalar m_maxAngMotorForce;
    btScalar m_accumulatedAngMotorImpulse;

        //------------------------    
        void initParams();
public:
        // constructors
    btSliderConstraint(btRigidBody& rbA, btRigidBody& rbB, const btTransform& frameInA, const btTransform& frameInB ,bool useLinearReferenceFrameA);
    btSliderConstraint(btRigidBody& rbB, const btTransform& frameInB, bool useLinearReferenceFrameA);

        // overrides

    virtual void getInfo1 (btConstraintInfo1* info);

        void getInfo1NonVirtual(btConstraintInfo1* info);
        
        virtual void getInfo2 (btConstraintInfo2* info);

        void getInfo2NonVirtual(btConstraintInfo2* info, const btTransform& transA, const btTransform& transB,const btVector3& linVelA,const btVector3& linVelB, btScalar rbAinvMass,btScalar rbBinvMass);


        // access
    const btRigidBody& getRigidBodyA() const { return m_rbA; }
    const btRigidBody& getRigidBodyB() const { return m_rbB; }
    const btTransform & getCalculatedTransformA() const { return m_calculatedTransformA; }
    const btTransform & getCalculatedTransformB() const { return m_calculatedTransformB; }
    const btTransform & getFrameOffsetA() const { return m_frameInA; }
    const btTransform & getFrameOffsetB() const { return m_frameInB; }
    btTransform & getFrameOffsetA() { return m_frameInA; }
    btTransform & getFrameOffsetB() { return m_frameInB; }
    btScalar getLowerLinLimit() { return m_lowerLinLimit; }
    void setLowerLinLimit(btScalar lowerLimit) { m_lowerLinLimit = lowerLimit; }
    btScalar getUpperLinLimit() { return m_upperLinLimit; }
    void setUpperLinLimit(btScalar upperLimit) { m_upperLinLimit = upperLimit; }
    btScalar getLowerAngLimit() { return m_lowerAngLimit; }
    void setLowerAngLimit(btScalar lowerLimit) { m_lowerAngLimit = btNormalizeAngle(lowerLimit); }
    btScalar getUpperAngLimit() { return m_upperAngLimit; }
    void setUpperAngLimit(btScalar upperLimit) { m_upperAngLimit = btNormalizeAngle(upperLimit); }
        bool getUseLinearReferenceFrameA() { return m_useLinearReferenceFrameA; }
        btScalar getSoftnessDirLin() { return m_softnessDirLin; }
        btScalar getRestitutionDirLin() { return m_restitutionDirLin; }
        btScalar getDampingDirLin() { return m_dampingDirLin ; }
        btScalar getSoftnessDirAng() { return m_softnessDirAng; }
        btScalar getRestitutionDirAng() { return m_restitutionDirAng; }
        btScalar getDampingDirAng() { return m_dampingDirAng; }
        btScalar getSoftnessLimLin() { return m_softnessLimLin; }
        btScalar getRestitutionLimLin() { return m_restitutionLimLin; }
        btScalar getDampingLimLin() { return m_dampingLimLin; }
        btScalar getSoftnessLimAng() { return m_softnessLimAng; }
        btScalar getRestitutionLimAng() { return m_restitutionLimAng; }
        btScalar getDampingLimAng() { return m_dampingLimAng; }
        btScalar getSoftnessOrthoLin() { return m_softnessOrthoLin; }
        btScalar getRestitutionOrthoLin() { return m_restitutionOrthoLin; }
        btScalar getDampingOrthoLin() { return m_dampingOrthoLin; }
        btScalar getSoftnessOrthoAng() { return m_softnessOrthoAng; }
        btScalar getRestitutionOrthoAng() { return m_restitutionOrthoAng; }
        btScalar getDampingOrthoAng() { return m_dampingOrthoAng; }
        void setSoftnessDirLin(btScalar softnessDirLin) { m_softnessDirLin = softnessDirLin; }
        void setRestitutionDirLin(btScalar restitutionDirLin) { m_restitutionDirLin = restitutionDirLin; }
        void setDampingDirLin(btScalar dampingDirLin) { m_dampingDirLin = dampingDirLin; }
        void setSoftnessDirAng(btScalar softnessDirAng) { m_softnessDirAng = softnessDirAng; }
        void setRestitutionDirAng(btScalar restitutionDirAng) { m_restitutionDirAng = restitutionDirAng; }
        void setDampingDirAng(btScalar dampingDirAng) { m_dampingDirAng = dampingDirAng; }
        void setSoftnessLimLin(btScalar softnessLimLin) { m_softnessLimLin = softnessLimLin; }
        void setRestitutionLimLin(btScalar restitutionLimLin) { m_restitutionLimLin = restitutionLimLin; }
        void setDampingLimLin(btScalar dampingLimLin) { m_dampingLimLin = dampingLimLin; }
        void setSoftnessLimAng(btScalar softnessLimAng) { m_softnessLimAng = softnessLimAng; }
        void setRestitutionLimAng(btScalar restitutionLimAng) { m_restitutionLimAng = restitutionLimAng; }
        void setDampingLimAng(btScalar dampingLimAng) { m_dampingLimAng = dampingLimAng; }
        void setSoftnessOrthoLin(btScalar softnessOrthoLin) { m_softnessOrthoLin = softnessOrthoLin; }
        void setRestitutionOrthoLin(btScalar restitutionOrthoLin) { m_restitutionOrthoLin = restitutionOrthoLin; }
        void setDampingOrthoLin(btScalar dampingOrthoLin) { m_dampingOrthoLin = dampingOrthoLin; }
        void setSoftnessOrthoAng(btScalar softnessOrthoAng) { m_softnessOrthoAng = softnessOrthoAng; }
        void setRestitutionOrthoAng(btScalar restitutionOrthoAng) { m_restitutionOrthoAng = restitutionOrthoAng; }
        void setDampingOrthoAng(btScalar dampingOrthoAng) { m_dampingOrthoAng = dampingOrthoAng; }
        void setPoweredLinMotor(bool onOff) { m_poweredLinMotor = onOff; }
        bool getPoweredLinMotor() { return m_poweredLinMotor; }
        void setTargetLinMotorVelocity(btScalar targetLinMotorVelocity) { m_targetLinMotorVelocity = targetLinMotorVelocity; }
        btScalar getTargetLinMotorVelocity() { return m_targetLinMotorVelocity; }
        void setMaxLinMotorForce(btScalar maxLinMotorForce) { m_maxLinMotorForce = maxLinMotorForce; }
        btScalar getMaxLinMotorForce() { return m_maxLinMotorForce; }
        void setPoweredAngMotor(bool onOff) { m_poweredAngMotor = onOff; }
        bool getPoweredAngMotor() { return m_poweredAngMotor; }
        void setTargetAngMotorVelocity(btScalar targetAngMotorVelocity) { m_targetAngMotorVelocity = targetAngMotorVelocity; }
        btScalar getTargetAngMotorVelocity() { return m_targetAngMotorVelocity; }
        void setMaxAngMotorForce(btScalar maxAngMotorForce) { m_maxAngMotorForce = maxAngMotorForce; }
        btScalar getMaxAngMotorForce() { return m_maxAngMotorForce; }
        btScalar getLinearPos() { return m_linPos; }
        

        // access for ODE solver
        bool getSolveLinLimit() { return m_solveLinLim; }
        btScalar getLinDepth() { return m_depth[0]; }
        bool getSolveAngLimit() { return m_solveAngLim; }
        btScalar getAngDepth() { return m_angDepth; }
        // shared code used by ODE solver
        void    calculateTransforms(const btTransform& transA,const btTransform& transB);
        void    testLinLimits();
        void    testAngLimits();
        // access for PE Solver
        btVector3 getAncorInA();
        btVector3 getAncorInB();
        // access for UseFrameOffset
        bool getUseFrameOffset() { return m_useOffsetForConstraintFrame; }
        void setUseFrameOffset(bool frameOffsetOnOff) { m_useOffsetForConstraintFrame = frameOffsetOnOff; }

        ///override the default global value of a parameter (such as ERP or CFM), optionally provide the axis (0..5). 
        ///If no axis is provided, it uses the default axis for this constraint.
        virtual void    setParam(int num, btScalar value, int axis = -1);
        ///return the local value of parameter
        virtual btScalar getParam(int num, int axis = -1) const;

        virtual int     calculateSerializeBufferSize() const;

        ///fills the dataBuffer and returns the struct name (and 0 on failure)
        virtual const char*     serialize(void* dataBuffer, btSerializer* serializer) const;


};

///do not change those serialization structures, it requires an updated sBulletDNAstr/sBulletDNAstr64
struct btSliderConstraintData
{
        btTypedConstraintData   m_typeConstraintData;
        btTransformFloatData m_rbAFrame; // constraint axii. Assumes z is hinge axis.
        btTransformFloatData m_rbBFrame;
        
        float   m_linearUpperLimit;
        float   m_linearLowerLimit;

        float   m_angularUpperLimit;
        float   m_angularLowerLimit;

        int     m_useLinearReferenceFrameA;
        int m_useOffsetForConstraintFrame;

};


SIMD_FORCE_INLINE               int     btSliderConstraint::calculateSerializeBufferSize() const
{
        return sizeof(btSliderConstraintData);
}

        ///fills the dataBuffer and returns the struct name (and 0 on failure)
SIMD_FORCE_INLINE       const char*     btSliderConstraint::serialize(void* dataBuffer, btSerializer* serializer) const
{

        btSliderConstraintData* sliderData = (btSliderConstraintData*) dataBuffer;
        btTypedConstraint::serialize(&sliderData->m_typeConstraintData,serializer);

        m_frameInA.serializeFloat(sliderData->m_rbAFrame);
        m_frameInB.serializeFloat(sliderData->m_rbBFrame);

        sliderData->m_linearUpperLimit = float(m_upperLinLimit);
        sliderData->m_linearLowerLimit = float(m_lowerLinLimit);

        sliderData->m_angularUpperLimit = float(m_upperAngLimit);
        sliderData->m_angularLowerLimit = float(m_lowerAngLimit);

        sliderData->m_useLinearReferenceFrameA = m_useLinearReferenceFrameA;
        sliderData->m_useOffsetForConstraintFrame = m_useOffsetForConstraintFrame;

        return "btSliderConstraintData";
}



#endif //SLIDER_CONSTRAINT_H