Planet
navi homePPSaboutscreenshotsdownloaddevelopmentforum

source: downloads/libogg-1.1.3/doc/Makefile.in @ 45

Last change on this file since 45 was 15, checked in by landauf, 17 years ago

added libogg

File size: 15.2 KB
Line 
1# Makefile.in generated by automake 1.9.5 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5# 2003, 2004, 2005  Free Software Foundation, Inc.
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17srcdir = @srcdir@
18top_srcdir = @top_srcdir@
19VPATH = @srcdir@
20pkgdatadir = $(datadir)/@PACKAGE@
21pkglibdir = $(libdir)/@PACKAGE@
22pkgincludedir = $(includedir)/@PACKAGE@
23top_builddir = ..
24am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
25INSTALL = @INSTALL@
26install_sh_DATA = $(install_sh) -c -m 644
27install_sh_PROGRAM = $(install_sh) -c
28install_sh_SCRIPT = $(install_sh) -c
29INSTALL_HEADER = $(INSTALL_DATA)
30transform = $(program_transform_name)
31NORMAL_INSTALL = :
32PRE_INSTALL = :
33POST_INSTALL = :
34NORMAL_UNINSTALL = :
35PRE_UNINSTALL = :
36POST_UNINSTALL = :
37build_triplet = @build@
38host_triplet = @host@
39subdir = doc
40DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
41ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
42am__aclocal_m4_deps = $(top_srcdir)/configure.in
43am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
44        $(ACLOCAL_M4)
45mkinstalldirs = $(install_sh) -d
46CONFIG_HEADER = $(top_builddir)/config.h
47CONFIG_CLEAN_FILES =
48SOURCES =
49DIST_SOURCES =
50RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
51        html-recursive info-recursive install-data-recursive \
52        install-exec-recursive install-info-recursive \
53        install-recursive installcheck-recursive installdirs-recursive \
54        pdf-recursive ps-recursive uninstall-info-recursive \
55        uninstall-recursive
56am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
57am__vpath_adj = case $$p in \
58    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
59    *) f=$$p;; \
60  esac;
61am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
62am__installdirs = "$(DESTDIR)$(docdir)"
63docDATA_INSTALL = $(INSTALL_DATA)
64DATA = $(doc_DATA)
65ETAGS = etags
66CTAGS = ctags
67DIST_SUBDIRS = $(SUBDIRS)
68DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
69ACLOCAL = @ACLOCAL@
70AMDEP_FALSE = @AMDEP_FALSE@
71AMDEP_TRUE = @AMDEP_TRUE@
72AMTAR = @AMTAR@
73AR = @AR@
74AUTOCONF = @AUTOCONF@
75AUTOHEADER = @AUTOHEADER@
76AUTOMAKE = @AUTOMAKE@
77AWK = @AWK@
78CC = @CC@
79CCDEPMODE = @CCDEPMODE@
80CFLAGS = @CFLAGS@
81CPP = @CPP@
82CPPFLAGS = @CPPFLAGS@
83CXX = @CXX@
84CXXCPP = @CXXCPP@
85CXXDEPMODE = @CXXDEPMODE@
86CXXFLAGS = @CXXFLAGS@
87CYGPATH_W = @CYGPATH_W@
88DEBUG = @DEBUG@
89DEFS = @DEFS@
90DEPDIR = @DEPDIR@
91ECHO = @ECHO@
92ECHO_C = @ECHO_C@
93ECHO_N = @ECHO_N@
94ECHO_T = @ECHO_T@
95EGREP = @EGREP@
96EXEEXT = @EXEEXT@
97F77 = @F77@
98FFLAGS = @FFLAGS@
99INSTALL_DATA = @INSTALL_DATA@
100INSTALL_PROGRAM = @INSTALL_PROGRAM@
101INSTALL_SCRIPT = @INSTALL_SCRIPT@
102INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
103LDFLAGS = @LDFLAGS@
104LIBOBJS = @LIBOBJS@
105LIBS = @LIBS@
106LIBTOOL = @LIBTOOL@
107LIBTOOL_DEPS = @LIBTOOL_DEPS@
108LIB_AGE = @LIB_AGE@
109LIB_CURRENT = @LIB_CURRENT@
110LIB_REVISION = @LIB_REVISION@
111LN_S = @LN_S@
112LTLIBOBJS = @LTLIBOBJS@
113MAINT = @MAINT@
114MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
115MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
116MAKEINFO = @MAKEINFO@
117OBJEXT = @OBJEXT@
118OPT = @OPT@
119PACKAGE = @PACKAGE@
120PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
121PACKAGE_NAME = @PACKAGE_NAME@
122PACKAGE_STRING = @PACKAGE_STRING@
123PACKAGE_TARNAME = @PACKAGE_TARNAME@
124PACKAGE_VERSION = @PACKAGE_VERSION@
125PATH_SEPARATOR = @PATH_SEPARATOR@
126PROFILE = @PROFILE@
127RANLIB = @RANLIB@
128SET_MAKE = @SET_MAKE@
129SHELL = @SHELL@
130SIZE16 = @SIZE16@
131SIZE32 = @SIZE32@
132SIZE64 = @SIZE64@
133STRIP = @STRIP@
134USIZE16 = @USIZE16@
135USIZE32 = @USIZE32@
136VERSION = @VERSION@
137ac_ct_AR = @ac_ct_AR@
138ac_ct_CC = @ac_ct_CC@
139ac_ct_CXX = @ac_ct_CXX@
140ac_ct_F77 = @ac_ct_F77@
141ac_ct_RANLIB = @ac_ct_RANLIB@
142ac_ct_STRIP = @ac_ct_STRIP@
143am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
144am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
145am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
146am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
147am__include = @am__include@
148am__leading_dot = @am__leading_dot@
149am__quote = @am__quote@
150am__tar = @am__tar@
151am__untar = @am__untar@
152bindir = @bindir@
153build = @build@
154build_alias = @build_alias@
155build_cpu = @build_cpu@
156build_os = @build_os@
157build_vendor = @build_vendor@
158datadir = @datadir@
159exec_prefix = @exec_prefix@
160host = @host@
161host_alias = @host_alias@
162host_cpu = @host_cpu@
163host_os = @host_os@
164host_vendor = @host_vendor@
165includedir = @includedir@
166infodir = @infodir@
167install_sh = @install_sh@
168libdir = @libdir@
169libexecdir = @libexecdir@
170localstatedir = @localstatedir@
171mandir = @mandir@
172mkdir_p = @mkdir_p@
173oldincludedir = @oldincludedir@
174prefix = @prefix@
175program_transform_name = @program_transform_name@
176sbindir = @sbindir@
177sharedstatedir = @sharedstatedir@
178sysconfdir = @sysconfdir@
179target_alias = @target_alias@
180SUBDIRS = libogg
181docdir = $(datadir)/doc/$(PACKAGE)-$(VERSION)
182doc_DATA = framing.html index.html oggstream.html ogg-multiplex.html \
183        stream.png vorbisword2.png white-ogg.png white-xifish.png \
184        rfc3533.txt rfc3534.txt
185
186EXTRA_DIST = $(doc_DATA)
187all: all-recursive
188
189.SUFFIXES:
190$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
191        @for dep in $?; do \
192          case '$(am__configure_deps)' in \
193            *$$dep*) \
194              cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
195                && exit 0; \
196              exit 1;; \
197          esac; \
198        done; \
199        echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  doc/Makefile'; \
200        cd $(top_srcdir) && \
201          $(AUTOMAKE) --gnu  doc/Makefile
202.PRECIOUS: Makefile
203Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
204        @case '$?' in \
205          *config.status*) \
206            cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
207          *) \
208            echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
209            cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
210        esac;
211
212$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
213        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
214
215$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
216        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
217$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
218        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
219
220mostlyclean-libtool:
221        -rm -f *.lo
222
223clean-libtool:
224        -rm -rf .libs _libs
225
226distclean-libtool:
227        -rm -f libtool
228uninstall-info-am:
229install-docDATA: $(doc_DATA)
230        @$(NORMAL_INSTALL)
231        test -z "$(docdir)" || $(mkdir_p) "$(DESTDIR)$(docdir)"
232        @list='$(doc_DATA)'; for p in $$list; do \
233          if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
234          f=$(am__strip_dir) \
235          echo " $(docDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(docdir)/$$f'"; \
236          $(docDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(docdir)/$$f"; \
237        done
238
239uninstall-docDATA:
240        @$(NORMAL_UNINSTALL)
241        @list='$(doc_DATA)'; for p in $$list; do \
242          f=$(am__strip_dir) \
243          echo " rm -f '$(DESTDIR)$(docdir)/$$f'"; \
244          rm -f "$(DESTDIR)$(docdir)/$$f"; \
245        done
246
247# This directory's subdirectories are mostly independent; you can cd
248# into them and run `make' without going through this Makefile.
249# To change the values of `make' variables: instead of editing Makefiles,
250# (1) if the variable is set in `config.status', edit `config.status'
251#     (which will cause the Makefiles to be regenerated when you run `make');
252# (2) otherwise, pass the desired values on the `make' command line.
253$(RECURSIVE_TARGETS):
254        @failcom='exit 1'; \
255        for f in x $$MAKEFLAGS; do \
256          case $$f in \
257            *=* | --[!k]*);; \
258            *k*) failcom='fail=yes';; \
259          esac; \
260        done; \
261        dot_seen=no; \
262        target=`echo $@ | sed s/-recursive//`; \
263        list='$(SUBDIRS)'; for subdir in $$list; do \
264          echo "Making $$target in $$subdir"; \
265          if test "$$subdir" = "."; then \
266            dot_seen=yes; \
267            local_target="$$target-am"; \
268          else \
269            local_target="$$target"; \
270          fi; \
271          (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
272          || eval $$failcom; \
273        done; \
274        if test "$$dot_seen" = "no"; then \
275          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
276        fi; test -z "$$fail"
277
278mostlyclean-recursive clean-recursive distclean-recursive \
279maintainer-clean-recursive:
280        @failcom='exit 1'; \
281        for f in x $$MAKEFLAGS; do \
282          case $$f in \
283            *=* | --[!k]*);; \
284            *k*) failcom='fail=yes';; \
285          esac; \
286        done; \
287        dot_seen=no; \
288        case "$@" in \
289          distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
290          *) list='$(SUBDIRS)' ;; \
291        esac; \
292        rev=''; for subdir in $$list; do \
293          if test "$$subdir" = "."; then :; else \
294            rev="$$subdir $$rev"; \
295          fi; \
296        done; \
297        rev="$$rev ."; \
298        target=`echo $@ | sed s/-recursive//`; \
299        for subdir in $$rev; do \
300          echo "Making $$target in $$subdir"; \
301          if test "$$subdir" = "."; then \
302            local_target="$$target-am"; \
303          else \
304            local_target="$$target"; \
305          fi; \
306          (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
307          || eval $$failcom; \
308        done && test -z "$$fail"
309tags-recursive:
310        list='$(SUBDIRS)'; for subdir in $$list; do \
311          test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
312        done
313ctags-recursive:
314        list='$(SUBDIRS)'; for subdir in $$list; do \
315          test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
316        done
317
318ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
319        list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
320        unique=`for i in $$list; do \
321            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
322          done | \
323          $(AWK) '    { files[$$0] = 1; } \
324               END { for (i in files) print i; }'`; \
325        mkid -fID $$unique
326tags: TAGS
327
328TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
329                $(TAGS_FILES) $(LISP)
330        tags=; \
331        here=`pwd`; \
332        if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
333          include_option=--etags-include; \
334          empty_fix=.; \
335        else \
336          include_option=--include; \
337          empty_fix=; \
338        fi; \
339        list='$(SUBDIRS)'; for subdir in $$list; do \
340          if test "$$subdir" = .; then :; else \
341            test ! -f $$subdir/TAGS || \
342              tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
343          fi; \
344        done; \
345        list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
346        unique=`for i in $$list; do \
347            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
348          done | \
349          $(AWK) '    { files[$$0] = 1; } \
350               END { for (i in files) print i; }'`; \
351        if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
352          test -n "$$unique" || unique=$$empty_fix; \
353          $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
354            $$tags $$unique; \
355        fi
356ctags: CTAGS
357CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
358                $(TAGS_FILES) $(LISP)
359        tags=; \
360        here=`pwd`; \
361        list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
362        unique=`for i in $$list; do \
363            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
364          done | \
365          $(AWK) '    { files[$$0] = 1; } \
366               END { for (i in files) print i; }'`; \
367        test -z "$(CTAGS_ARGS)$$tags$$unique" \
368          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
369             $$tags $$unique
370
371GTAGS:
372        here=`$(am__cd) $(top_builddir) && pwd` \
373          && cd $(top_srcdir) \
374          && gtags -i $(GTAGS_ARGS) $$here
375
376distclean-tags:
377        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
378
379distdir: $(DISTFILES)
380        @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
381        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
382        list='$(DISTFILES)'; for file in $$list; do \
383          case $$file in \
384            $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
385            $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
386          esac; \
387          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
388          dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
389          if test "$$dir" != "$$file" && test "$$dir" != "."; then \
390            dir="/$$dir"; \
391            $(mkdir_p) "$(distdir)$$dir"; \
392          else \
393            dir=''; \
394          fi; \
395          if test -d $$d/$$file; then \
396            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
397              cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
398            fi; \
399            cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
400          else \
401            test -f $(distdir)/$$file \
402            || cp -p $$d/$$file $(distdir)/$$file \
403            || exit 1; \
404          fi; \
405        done
406        list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
407          if test "$$subdir" = .; then :; else \
408            test -d "$(distdir)/$$subdir" \
409            || $(mkdir_p) "$(distdir)/$$subdir" \
410            || exit 1; \
411            distdir=`$(am__cd) $(distdir) && pwd`; \
412            top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
413            (cd $$subdir && \
414              $(MAKE) $(AM_MAKEFLAGS) \
415                top_distdir="$$top_distdir" \
416                distdir="$$distdir/$$subdir" \
417                distdir) \
418              || exit 1; \
419          fi; \
420        done
421check-am: all-am
422check: check-recursive
423all-am: Makefile $(DATA)
424installdirs: installdirs-recursive
425installdirs-am:
426        for dir in "$(DESTDIR)$(docdir)"; do \
427          test -z "$$dir" || $(mkdir_p) "$$dir"; \
428        done
429install: install-recursive
430install-exec: install-exec-recursive
431install-data: install-data-recursive
432uninstall: uninstall-recursive
433
434install-am: all-am
435        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
436
437installcheck: installcheck-recursive
438install-strip:
439        $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
440          install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
441          `test -z '$(STRIP)' || \
442            echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
443mostlyclean-generic:
444
445clean-generic:
446
447distclean-generic:
448        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
449
450maintainer-clean-generic:
451        @echo "This command is intended for maintainers to use"
452        @echo "it deletes files that may require special tools to rebuild."
453clean: clean-recursive
454
455clean-am: clean-generic clean-libtool mostlyclean-am
456
457distclean: distclean-recursive
458        -rm -f Makefile
459distclean-am: clean-am distclean-generic distclean-libtool \
460        distclean-tags
461
462dvi: dvi-recursive
463
464dvi-am:
465
466html: html-recursive
467
468info: info-recursive
469
470info-am:
471
472install-data-am: install-docDATA
473
474install-exec-am:
475
476install-info: install-info-recursive
477
478install-man:
479
480installcheck-am:
481
482maintainer-clean: maintainer-clean-recursive
483        -rm -f Makefile
484maintainer-clean-am: distclean-am maintainer-clean-generic
485
486mostlyclean: mostlyclean-recursive
487
488mostlyclean-am: mostlyclean-generic mostlyclean-libtool
489
490pdf: pdf-recursive
491
492pdf-am:
493
494ps: ps-recursive
495
496ps-am:
497
498uninstall-am: uninstall-docDATA uninstall-info-am
499
500uninstall-info: uninstall-info-recursive
501
502.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \
503        clean clean-generic clean-libtool clean-recursive ctags \
504        ctags-recursive distclean distclean-generic distclean-libtool \
505        distclean-recursive distclean-tags distdir dvi dvi-am html \
506        html-am info info-am install install-am install-data \
507        install-data-am install-docDATA install-exec install-exec-am \
508        install-info install-info-am install-man install-strip \
509        installcheck installcheck-am installdirs installdirs-am \
510        maintainer-clean maintainer-clean-generic \
511        maintainer-clean-recursive mostlyclean mostlyclean-generic \
512        mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \
513        tags tags-recursive uninstall uninstall-am uninstall-docDATA \
514        uninstall-info-am
515
516# Tell versions [3.59,3.63) of GNU make to not export all variables.
517# Otherwise a system limit (for SysV at least) may be exceeded.
518.NOEXPORT:
Note: See TracBrowser for help on using the repository browser.