| 1 | <ogreode> |
|---|
| 2 | <ragdoll name="zombie" meshName="zombie.mesh"> |
|---|
| 3 | |
|---|
| 4 | <!-- Set up the default settings --> |
|---|
| 5 | <defaults> |
|---|
| 6 | <settings geometry="capsule" joint="ball" collapse="none" mass="50" radius="0.25"> |
|---|
| 7 | <damping angular="0.1" linear="0.1" /> |
|---|
| 8 | <axis number="1" x="1" y="0" z="0" /> |
|---|
| 9 | <axis number="2" x="0" y="1" z="0" /> |
|---|
| 10 | </settings> |
|---|
| 11 | </defaults> |
|---|
| 12 | |
|---|
| 13 | <!-- Set up some specific settings, if no value's provided then the value that was last set for that parameter --> |
|---|
| 14 | <bone name="Torso"> |
|---|
| 15 | <settings geometry="box" joint="fixed" /> |
|---|
| 16 | </bone> |
|---|
| 17 | |
|---|
| 18 | <bone name="Shoulders" /> |
|---|
| 19 | |
|---|
| 20 | <bone name="Neck"> |
|---|
| 21 | <settings joint="universal"> |
|---|
| 22 | <axis number="1" x="0" y="1" z="0"> |
|---|
| 23 | <stop low="-1.57" high="1.57" /> |
|---|
| 24 | </axis> |
|---|
| 25 | <axis number="2" x="1" y="0" z="0"> |
|---|
| 26 | <stop low="-1.0" high="0.8" /> |
|---|
| 27 | </axis> |
|---|
| 28 | </settings> |
|---|
| 29 | </bone> |
|---|
| 30 | |
|---|
| 31 | <bone name="LeftAnkle"> |
|---|
| 32 | <settings joint="hinge"> |
|---|
| 33 | <axis number="1" x="1" y="0" z="0"> |
|---|
| 34 | <stop low="-1.57" high="0.8" /> |
|---|
| 35 | </axis> |
|---|
| 36 | </settings> |
|---|
| 37 | </bone> |
|---|
| 38 | |
|---|
| 39 | <bone name="RightAnkle" /> |
|---|
| 40 | |
|---|
| 41 | <bone name="LeftElbow"> |
|---|
| 42 | <settings geometry="capsule"> |
|---|
| 43 | <axis number="1"> |
|---|
| 44 | <stop low="0.0" high="2.0" /> |
|---|
| 45 | </axis> |
|---|
| 46 | </settings> |
|---|
| 47 | </bone> |
|---|
| 48 | |
|---|
| 49 | <bone name="RightElbow" /> |
|---|
| 50 | |
|---|
| 51 | <bone name="LeftKnee"> |
|---|
| 52 | <settings> |
|---|
| 53 | <axis number="1"> |
|---|
| 54 | <stop low="-1.57" high="0.0" /> |
|---|
| 55 | </axis> |
|---|
| 56 | </settings> |
|---|
| 57 | </bone> |
|---|
| 58 | |
|---|
| 59 | <bone name="RightKnee" /> |
|---|
| 60 | |
|---|
| 61 | <bone name="RightHip"> |
|---|
| 62 | <settings joint="universal"> |
|---|
| 63 | <axis number="1" x="1" y="0" z="0"> |
|---|
| 64 | <stop low="-0.8" high="0.8" /> |
|---|
| 65 | </axis> |
|---|
| 66 | <axis number="2" x="0" y="0" z="1"> |
|---|
| 67 | <stop low="0.0" high="0.8" /> |
|---|
| 68 | </axis> |
|---|
| 69 | </settings> |
|---|
| 70 | </bone> |
|---|
| 71 | |
|---|
| 72 | <bone name="LeftHip"> |
|---|
| 73 | <settings> |
|---|
| 74 | <axis number="2" x="0" y="0" z="-1" /> |
|---|
| 75 | </settings> |
|---|
| 76 | </bone> |
|---|
| 77 | |
|---|
| 78 | <bone name="RightShoulder"> |
|---|
| 79 | <settings> |
|---|
| 80 | <axis number="1"> |
|---|
| 81 | <stop low="-1.57" high="3.1416" /> |
|---|
| 82 | </axis> |
|---|
| 83 | <axis number="2" z="1"> |
|---|
| 84 | <stop low="0" high="1.57" /> |
|---|
| 85 | </axis> |
|---|
| 86 | </settings> |
|---|
| 87 | </bone> |
|---|
| 88 | |
|---|
| 89 | <bone name="LeftShoulder"> |
|---|
| 90 | <settings> |
|---|
| 91 | <axis number="2" z="-1" /> |
|---|
| 92 | </settings> |
|---|
| 93 | </bone> |
|---|
| 94 | |
|---|
| 95 | <!-- Set the root bone so it's collapsed up to where it joins the next |
|---|
| 96 | body, to stop a big thing dangling down between his legs (Ooer!) |
|---|
| 97 | Collapse is only (currently) supported on capsule bones --> |
|---|
| 98 | <bone name="Root"> |
|---|
| 99 | <settings collapse="up" /> |
|---|
| 100 | </bone> |
|---|
| 101 | |
|---|
| 102 | </ragdoll> |
|---|
| 103 | |
|---|
| 104 | <!-- Create the vehicle using the supplied name and body mesh, make it 1.5 units heavy |
|---|
| 105 | e.g. tonnes and offset the center of gravity by half (a metre) to make it more stable |
|---|
| 106 | This puts the CoG somewhere around the wheel hubs, which is probably reasonably |
|---|
| 107 | realistic for a sports-car --> |
|---|
| 108 | <vehicle name="Subaru"> |
|---|
| 109 | |
|---|
| 110 | <body mesh="scooby_body.mesh"> |
|---|
| 111 | <mass value="1.5" x="0" y="-0.5" z="0" /> |
|---|
| 112 | </body> |
|---|
| 113 | |
|---|
| 114 | <!-- Create all the wheels, using the supplied mesh and with the specified offset |
|---|
| 115 | relative to the car. The mass is 0.02 units, in our case that's around 20Kg --> |
|---|
| 116 | <wheel mesh="scooby_wheell.mesh" x="0.8045" y="-0.46698" z="1.4" mass="0.02"> |
|---|
| 117 | <steer factor="1" force="8.0" speed="4.0" limit="0.75" /> |
|---|
| 118 | <brake factor="0.75" /> |
|---|
| 119 | <contact bouncyness="0.9" friction="1.5" fds="0.002" /> |
|---|
| 120 | </wheel> |
|---|
| 121 | <wheel mesh="scooby_wheelr.mesh" x="-0.8045" y="-0.46698" z="1.4" mass="0.02"> |
|---|
| 122 | <steer factor="1" force="8.0" speed="4.0" limit="0.75" /> |
|---|
| 123 | <brake factor="0.75" /> |
|---|
| 124 | <contact bouncyness="0.9" friction="1.5" fds="0.002" /> |
|---|
| 125 | </wheel> |
|---|
| 126 | <wheel mesh="scooby_wheell.mesh" x="0.8045" y="-0.46698" z="-1.4" mass="0.02"> |
|---|
| 127 | <power factor="1" /> |
|---|
| 128 | <brake factort="0.25" /> |
|---|
| 129 | <contact bouncyness="0.9" friction="1.5" fds="0.002" /> |
|---|
| 130 | </wheel> |
|---|
| 131 | <wheel mesh="scooby_wheelr.mesh" x="-0.8045" y="-0.46698" z="-1.4" mass="0.02"> |
|---|
| 132 | <power factor="1" /> |
|---|
| 133 | <brake factor="0.25" /> |
|---|
| 134 | <contact bouncyness="0.9" friction="1.5" fds="0.002" /> |
|---|
| 135 | <suspension spring="90" damping="0.95" step="0.01" /> |
|---|
| 136 | </wheel> |
|---|
| 137 | |
|---|
| 138 | <!-- Set up the suspension spring and damping constants, passing the rate we're going to |
|---|
| 139 | be stepping the world so it can work out the forces needed each step |
|---|
| 140 | We could do this per-wheel, like the other factors, but it's easier to do it this way. |
|---|
| 141 | N.B. You must create the wheels before you can do this! --> |
|---|
| 142 | <suspension spring="90" damping="0.95" step="0.01" /> |
|---|
| 143 | |
|---|
| 144 | <!-- Set the engine (and other drivetrain) parameters, lots of work still to do here! --> |
|---|
| 145 | <engine redline="70.0" brake="10.0"> |
|---|
| 146 | <torque min="0.25" max="5.0" /> |
|---|
| 147 | </engine> |
|---|
| 148 | </vehicle> |
|---|
| 149 | |
|---|
| 150 | <!-- Create the vehicle using the supplied name and body mesh, make it 1.5 units heavy |
|---|
| 151 | e.g. tonnes and offset the center of gravity by half (a metre) to make it more stable |
|---|
| 152 | This puts the CoG somewhere around the wheel hubs, which is probably reasonably |
|---|
| 153 | realistic for a sports-car --> |
|---|
| 154 | <vehicle name="Jeep"> |
|---|
| 155 | |
|---|
| 156 | <body mesh="jeep_body.mesh"> |
|---|
| 157 | <mass value="3" x="0" y="-1" z="0" /> |
|---|
| 158 | </body> |
|---|
| 159 | |
|---|
| 160 | <wheel mesh="jeep_wheell.mesh" x="1" y="-1.1" z="1.8" mass="0.06"> |
|---|
| 161 | <steer factor="1" force="8.0" speed="4.0" limit="0.75" /> |
|---|
| 162 | <brake factor="0.75" /> |
|---|
| 163 | <power factor="1.0" /> |
|---|
| 164 | <contact bouncyness="0.9" friction="1.5" fds="0.004" /> |
|---|
| 165 | </wheel> |
|---|
| 166 | <wheel mesh="jeep_wheelr.mesh" x="-1" y="-1.1" z="1.8" mass="0.06"> |
|---|
| 167 | <steer factor="1" force="8.0" speed="4.0" limit="0.75" /> |
|---|
| 168 | <brake factor="0.75" /> |
|---|
| 169 | <power factor="1.0" /> |
|---|
| 170 | <contact bouncyness="0.9" friction="1.5" fds="0.004" /> |
|---|
| 171 | </wheel> |
|---|
| 172 | <wheel mesh="jeep_wheell.mesh" x="1" y="-1.1" z="-1.6" mass="0.06"> |
|---|
| 173 | <brake factor="0.25" /> |
|---|
| 174 | <power factor="1.0" /> |
|---|
| 175 | <contact bouncyness="0.9" friction="1.5" fds="0.004" /> |
|---|
| 176 | </wheel> |
|---|
| 177 | <wheel mesh="jeep_wheelr.mesh" x="-1" y="-1.1" z="-1.6" mass="0.06"> |
|---|
| 178 | <brake factor="0.25" /> |
|---|
| 179 | <power factor="1.0" /> |
|---|
| 180 | <contact bouncyness="0.9" friction="1.5" fds="0.004" /> |
|---|
| 181 | </wheel> |
|---|
| 182 | |
|---|
| 183 | <suspension spring="100" damping="3.6" step="0.01" /> |
|---|
| 184 | |
|---|
| 185 | <engine redline="30.0" brake="15.0"> |
|---|
| 186 | <torque min="0.5" max="10.0" /> |
|---|
| 187 | </engine> |
|---|
| 188 | </vehicle> |
|---|
| 189 | </ogreode> |
|---|
| 190 | |
|---|
